Kemetyl

My Account
A New spin on topping up A New spin on topping up

A New spin on topping up


Shop now

The easy way to top up your AdBlue

AdBlue from Kemetyl has a unique non-spill cap so you are guaranteed 100% no spillage with our 1.5L and 3.5L easy to top up bottles.

It’s easy to DIY

If you want to avoid a trip to the dealer with all that it entails, then you are in the right place. Topping up your Adblue tank safely and without spilling is really really easy. In fact, it’s easier than filling up your screen wash bottle. Kemetyl AdBlue 1.5ltr & 3.5ltr bottles have been specially designed for everyone including those of you who normally wouldn’t dream of pouring a fluid into your car or van. If you want to follow the industry recommendations on how it should be done, then Kemetyl AdBlue is for you.

It meets all the ISO standards which set out to make it as easy as possible and most importantly Kemetyl’s unique design ensures that you won’t get your hands, clothes or shoes wet!

How to guide

Step One

Step One

To use Kemetyl AdBlue® Non Spill Technology, first, open the cap of the bottle.
Step Two

Step Two

Screw the bottle into the AdBlue® tank neck in a clockwise direction until firmly secured. Remember to support the bottle when refilling to avoid damage to the bottle or the tank neck.
Step Three

Step Three

Pull the bottle upwards towards you and this will open the valve in the neck to start filling. When the tank is full any remaining fluid in the bottle will stop flowing.
Step Four

Step Four

Push the bottle back in to close the valve. Unscrew the bottle in an anti-clockwise direction. Then dispose of bottle responsibly.
Why do you need Adblue?

Why do you need Adblue?

Well, if you have a diesel vehicle which has been designed to meet Euro 6 then the chances are that the car or van is fitted with Selective Catalytic Reduction (SCR) technology. This technology is designed to reduce the amount of Nitrogen Oxide (harmful exhaust emissions) and works in conjunction with the addition of AdBlue®. When the AdBlue® is injected into the exhaust gases and passes through the SCR catalysator the Nitrogen Oxide is converted into harmless nitrogen and water, reducing emissions of nitrogen oxides by up to 80%. AdBlue® consumption is determined by the size of the diesel engine and the way you drive!

FIND OUT MORE